PxrSplineMap
- David Hackett (Unlicensed)
- Andrej Babic
Use this pattern to remap an input to both float and color outputs
Input Parameters
Input
The input color will be remapped with the specified Float Ramp
Input Range
Input Min
The lower range of the input. This will be linearly mapped to 0.0 before applying the Float Ramp
Input Max
The upper range of the input. This will be linearly mapped to 1.0 before applying the Float Ramp
Clamp Input
If enabled, inputs less than inputMin or greater than inputMax will be clamped before applying the Float Ramp. Clamping is performed on each color component independently. If disabled this may produce excessive results.
Float Ramp
Adjust the Float Ramp for your Float output
Output Range
Output Min
The lower range of the output. Values will be linearly mapped from 0.0 to this after applying the Float Ramp
Output Max
The upper range of the output. Values will be linearly mapped from 1.0 to this after applying the Float Ramp
Clamp Output
If enabled, the final outputs will be clamped to the 0.0 to 1.0 range. This clamping is performed on each color component independently.
Color Ramp
Adjust the Color Ramp for your Color output
Output Parameters
OutColor
The clamped result.
OutColor R
The R channel from the OutColor output.
Ou Color G
The G channel from the OutColor output.
OutColor B
The B channel from the OutColor output.